10/11/2022,20:28:21,$HST:Application just created
10/11/2022,20:28:21,$HST:SW-version 1.24, e-Callisto
10/11/2022,20:28:21,$HST:Configurationfile read
10/11/2022,20:28:21,$HST:Switched to automatic
10/11/2022,20:28:21,$HST:ATmega16 pre-configured
10/11/2022,20:28:21,$HST:Frequencyfile frq00470.cfg
10/11/2022,20:28:21,$HST:Callisto ready now...
10/11/2022,20:28:21,$HST:Measurement idle
10/11/2022,20:28:21,$HST:File scheduler.cfg read
10/11/2022,20:28:21,$HST:No more entries in scheduler.
10/11/2022,20:28:21,$HST:Measurement enable
10/11/2022,20:28:21,$CRX:AGC gain = 2.59V
10/11/2022,20:28:21,$CRX:Emitter BF199 = 0.20V
10/11/2022,20:28:21,$CRX:Analog Input = 11.23
10/11/2022,20:28:27,$HST:File FRQ00470.CFG read
10/11/2022,20:28:27,$HST:No calibration file found
10/11/2022,20:28:27,$HST:Plot buffer erased...
10/11/2022,20:28:27,$HST:Parametrisation RCU
10/11/2022,20:28:28,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:28,$HST:Found LO=25.43 MHz
10/11/2022,20:28:28,$CRX:Debug=Off
10/11/2022,20:28:28,$CRX:Trigger=Extern
10/11/2022,20:28:28,$CRX:FPUcodex=2
10/11/2022,20:28:28,$CRX:GS =0
10/11/2022,20:28:28,$CRX:GA =624
10/11/2022,20:28:28,$CRX:Delay=0msec
10/11/2022,20:28:28,$CRX:Frequency=45.0MHz
10/11/2022,20:28:28,$HST:Receiver connected
10/11/2022,20:28:28,$CRX:Sweeplength=200
10/11/2022,20:28:28,$CRX:low_band_max=171MHz
10/11/2022,20:28:28,$CRX:mid_band_max=450MHz
10/11/2022,20:28:28,$CRX:high_band_max=863MHz
10/11/2022,20:28:28,$CRX:Idle=0
10/11/2022,20:28:28,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:28,$HST:Found LO=25.43 MHz
10/11/2022,20:28:28,$CRX:Debug=Off
10/11/2022,20:28:28,$CRX:Trigger=Extern
10/11/2022,20:28:28,$CRX:FPUcodex=2
10/11/2022,20:28:28,$CRX:GS =0
10/11/2022,20:28:28,$CRX:GA =624
10/11/2022,20:28:28,$CRX:Delay=0msec
10/11/2022,20:28:28,$CRX:Frequency=45.0MHz
10/11/2022,20:28:28,$HST:Receiver connected
10/11/2022,20:28:28,$CRX:Sweeplength=200
10/11/2022,20:28:28,$CRX:low_band_max=171MHz
10/11/2022,20:28:28,$CRX:mid_band_max=450MHz
10/11/2022,20:28:28,$CRX:high_band_max=863MHz
10/11/2022,20:28:28,$CRX:Idle=0
10/11/2022,20:28:34,$HST:File FRQ00470.CFG read
10/11/2022,20:28:34,$HST:No calibration file found
10/11/2022,20:28:34,$HST:Plot buffer erased...
10/11/2022,20:28:34,$HST:Parametrisation RCU
10/11/2022,20:28:34,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:34,$HST:Found LO=25.43 MHz
10/11/2022,20:28:34,$CRX:Debug=Off
10/11/2022,20:28:34,$CRX:Trigger=Extern
10/11/2022,20:28:34,$CRX:FPUcodex=2
10/11/2022,20:28:34,$CRX:GS =0
10/11/2022,20:28:34,$CRX:GA =624
10/11/2022,20:28:34,$CRX:Delay=0msec
10/11/2022,20:28:34,$CRX:Frequency=45.0MHz
10/11/2022,20:28:34,$HST:Receiver connected
10/11/2022,20:28:34,$CRX:Sweeplength=200
10/11/2022,20:28:34,$CRX:low_band_max=171MHz
10/11/2022,20:28:34,$CRX:mid_band_max=450MHz
10/11/2022,20:28:34,$CRX:high_band_max=863MHz
10/11/2022,20:28:34,$CRX:Idle=0
10/11/2022,20:28:34,$CRX:V1.8 / 2012-04-02
10/11/2022,20:28:34,$HST:Found LO=25.43 MHz
10/11/2022,20:28:34,$CRX:Debug=Off
10/11/2022,20:28:34,$CRX:Trigger=Extern
10/11/2022,20:28:34,$CRX:FPUcodex=2
10/11/2022,20:28:34,$CRX:GS =0
10/11/2022,20:28:34,$CRX:GA =624
10/11/2022,20:28:34,$CRX:Delay=0msec
10/11/2022,20:28:34,$CRX:Frequency=45.0MHz
10/11/2022,20:28:34,$HST:Receiver connected
10/11/2022,20:28:34,$CRX:Sweeplength=200
10/11/2022,20:28:34,$CRX:low_band_max=171MHz
10/11/2022,20:28:34,$CRX:mid_band_max=450MHz
10/11/2022,20:28:34,$CRX:high_band_max=863MHz
10/11/2022,20:28:34,$CRX:Idle=0
10/11/2022,20:29:13,$HST:Param. RCU due to START
10/11/2022,20:29:13,$HST:Actual focuscode 01
10/11/2022,20:29:13,$HST:Enable data transfer
10/11/2022,20:29:13,$HST:Continuous measurement
10/11/2022,20:29:13,$CRX:Started
10/11/2022,20:29:13,$HST:Start new FITS-file
10/11/2022,20:29:13,$HST:Continous measurement
10/11/2022,20:29:16,$HST:XY plot selected
11/11/2022,00:00:00,$HST:Midnight -> memo cleared
11/11/2022,00:00:00,$HST:EOF(logfile)